Can You Skim Coat Over Wallpaper?

Male Painter With A Putty Knife In His Hands

Written by Let's Upgrade Painting on September 2, 2024. Posted in Drywall Repair, Residential Painting, Wallpaper. No Comments on Can You Skim Coat Over Wallpaper?

So, you’re staring at that old wallpaper and wondering if you can just skim coat over it, huh?

It’s a question I get a lot, and I totally understand why. Wallpaper can be a real pain to remove sometimes, and skim coating seems like it might be an easy fix.

The thing is, while you can skim coat over wallpaper, it’s not always the best choice.

So, before you decide to go this route, it’s important to understand what you’re getting into, and potential issues you could run into.

In this post, I’ll go over everything you need to know about skim coating over wallpaper.

Can You Skim Coat Over Wallpaper Without Removing It?

Yes, you can skim coat over wallpaper (or even wallpaper glue) without taking it off first.

This can be a real time-saver, especially when the wallpaper just doesn’t want to come off or if removing it might damage your walls.

But here’s the thing – it’s not always smooth sailing.

How well it works really depends on what shape your wallpaper is in.

If it’s stuck on there good and tight, you might be okay. But if it’s peeling or bubbling anywhere, you could run into some trouble.

I’ll talk about some of the risks later on in the post.

How To Skim Coat Over Wallpaper

Here’s a step by step guide on how to skim over your wallpaper properly:

#1 Assess The Situation

Before you jump in, take a good look at your walls.

Are there large sections of loose wallpaper? Is the paper peeling off in some areas but not others? These are all things you need to consider.

You should only skim coat if the existing wallpaper is still in relatively good condition.

#2 Address Problem Areas

Now that you’ve decided to go ahead with skim coating, it’s time to get your walls ready. You need to make sure your wallpaper is as smooth and well-adhered as possible.

Walk around your room and run your hands over the walls. Feel for any bubbles and loose edges. These are the spots you’ll need to address.

Outlets, light switches, and corners are usually where wallpaper starts to give up the ghost first.

You can cut away these loose sections and bubbles with a utility knife.

You can use some wallpaper paste if needed too.

#3 Prepare Corners And Seams

Now that we’ve dealt with the problem areas, let’s focus on the corners and seams.

In the corners where you’ve cut out the wallpaper, you’ll want to make sure you have a clean, straight edge to work with.

This might mean doing a bit more cutting or even sanding to get things just right.

As for those seams where one piece of wallpaper meets another, we can’t just ignore them. If we did, they might show through our skim coat, and that’s definitely not the professional look we’re aiming for.

We’ll need to reinforce these areas to make sure they don’t cause us problems down the line.

Also Read: Preparing Walls for Painting After Removing Wallpaper

#4 Apply Drywall Tape

Time to break out the tape! For the corners, we’re going to use good old-fashioned paper tape. It might not look like much, but it’s perfect for creating those sharp, clean edges we want.

Apply it carefully, making sure it’s straight and well-adhered.

For the seams between wallpaper pieces, I like to use fiber fuse drywall tape. It’s easy to work with and does a great job of reinforcing those potential weak spots.

If you can’t find fiber fuse, fiberglass mesh tape will do the trick too.

Just remember, if you go with mesh, you’ll need to use a quick-setting compound instead of regular joint compound.

#5 Mud And Tape As Normal

Now we’re getting to the heart of the matter – the actual skim coating.

Treat this just like you would any other skim coating job.

Apply your joint compound over the tape, making sure to spread it evenly. Use your taping knife to smooth it out, feathering the edges so they blend seamlessly with the surrounding areas.

You’ll probably need to apply multiple coats to get a really smooth finish.

Don’t try to do it all in one go – thin, even layers are the key to success here. Pay extra attention to those taped areas – they can be a bit trickier to get smooth.

And don’t forget to let each coat dry completely before adding the next one.

#6 Sanding

Once your final coat of joint compound is completely dry, it’s time to sand. Use a fine-grit sandpaper and take your time. The goal here is to create a surface that’s smooth as glass.

Run your hands over the walls – they should feel perfectly even, with no bumps or dips.

#7 Finish And Review

Now step back and take a good look at your work.

Are there any spots that need touching up?

Any areas where you can still see a hint of the old wallpaper texture?

Now’s the time to address these issues. It might mean applying another small patch of compound or doing a bit more sanding, but it’s worth it to get a truly professional-looking finish.

When you’re done, your walls should look like they were never wallpapered in the first place.

Risks Of Skim Coating Over Wallpaper

Now let’s talk about some of the risks involved in skim coating over wallpaper. It’s important to know what you’re getting into:

Adhesion Problems

One of the biggest issues is getting the joint compound to stick properly.

Wallpaper isn’t always the best surface for this, especially if it’s got a shiny finish.

If the compound doesn’t stick well, you might end up with cracks or peeling down the line.

This is why you need to make sure the wallpaper is in good shape and maybe even use a special bonding agent to help everything stick together.

Wallpaper Might Peel Or Bubble

Even if your wallpaper looks well-adhered now, the moisture from the joint compound could cause problems sometimes.

The water in the compound can sometimes seep through to the wallpaper adhesive..

This can lead to bubbling or peeling of the wallpaper underneath your newly skim coated surface.

The tricky part is that this doesn’t always happen right away. You might think everything’s fine, and then months later, you start seeing issues.

Uneven Surface

If your wallpaper has any kind of texture or pattern, it might show through your skim coat.

This can leave you with a surface that’s not quite as smooth as you want, and it might even be noticeable after painting.

You might need to put on several layers of joint compound to fix this.

Harder To Remove The Wallpaper Later

Here’s something to think about for the future – if you skim coat over your wallpaper, it’s going to be much harder to remove it later on.

The joint compound will stick to the wallpaper, basically gluing it to the wall even more.

If you ever try to take it off, you’ll probably end up damaging the wall underneath.

So before you start skim coating, make sure you’re okay with that.

Bottom Line

Skimming over wallpaper isn’t always recommended, but sometimes it’s the best option we’ve got. Take your time, follow these steps, and you’ll end up with walls that are smooth and ready for whatever color you throw at them.

Do You Prime Before Texture? (Yes – Here’s Why)

Written by Let's Upgrade Painting on August 7, 2024. Posted in Drywall Repair. No Comments on Do You Prime Before Texture? (Yes – Here’s Why)

If you’re getting ready to spruce up your walls, you might find yourself wondering about the order of operations. Should you prime before or after adding texture?

It’s a pretty common question, and while there’s some debate out there.

But the proper way is to prime first and then apply the texture.

That is what most professionals and product manufacturers recommend, and that is what we recommend too.

There are some pretty good reasons for this, and it usually means your walls end up looking awesome and staying that way for ages.

In this post, I’ll shed some light on why you should prime before texture.

Why You Should Prime Before Texture

Here are the 4 biggest reasons why you should prime first:

#1 Improves Texture Adhesion

Priming before you add texture gives that texture something to really grab onto. Primer makes your wall a bit sticky, which means the texture can hold on tight.

This is super important for a couple of reasons.

First, it means your texture is way less likely to start peeling or flaking off over time.

Nobody wants to see their hard work start to come apart, right?

Second, it’s especially crucial in areas of your home that tend to get a bit damp or steamy.

In bathrooms, kitchens, or even in humid climates, that extra grip can make all the difference in keeping your textured walls looking great for years to come.

Also Read: Why Use High-Quality Paints and Materials?

#2 Even Absorption

Priming before you add texture also seals the drywall surface and makes sure the whole wall absorbs the texture evenly.

This is really important if you’re working with new drywall or patches.

New drywall often has spots that soak up more than others. The same goes for walls with patches – the fixed-up areas will probably absorb differently than the rest of the wall.

If you put texture right on these surfaces, you might end up with a patchy look because some areas will soak up more of the texture than others.

Primer evens things out. It creates a surface that absorbs the same way all over the wall.

This means when you put on your texture, it’s more likely to look even and consistent from one spot to another.

Even absorption also helps your texture last longer – it’s less likely to crack or peel over time.

#3 Highlights Imperfections

Another cool thing about priming before texturing is that it can help you spot imperfections in your wall that you might have missed otherwise.

When you put on primer, it can make small dents, dings, or uneven spots easier to see.

Now, you might be thinking, “Why would I want to see more imperfections?”

Well, it’s actually a good thing! Finding out these issues before you apply texture, you give yourself the opportunity to fix them.

Also Read: How To Prep Walls For Painting After Removing Wallpaper

You can fill in small holes, sand down bumps, or deal with any other issues you notice.

Fixing these flaws at this point is way easier than trying to fix them after you’ve added texture.

It lets you start with a smoother, more even surface, which means your texture job will look more professional.

Plus, dealing with these issues now can save you headaches later. Flaws that are covered up by texture can sometimes become more noticeable over time, especially after painting.

#4 Better Texture Appearance

Priming before texturing can make your textured wall look way better in the end.

The primer creates an even base color, which can really make your texture stand out.

This is super important if you’re using a light-colored texture or if you’re planning to paint your wall a color that’s totally different from the original wall color.

The primer gives you a consistent background that lets the texture really shine.

Without primer, the original wall color might peek through in spots, especially if your texture is thin in some areas. This can make things look uneven.

Primer can also change how light hits your textured wall.

A primed surface often creates more depth in the texture, making the overall look even cooler.

What Do The Manufacturers Recommend?

A lot of the texture product companies actually tell you to prime before you use their stuff.

They don’t do this just for fun – there are good reasons behind their advice.

These companies have spent a lot of time and money testing their products in different conditions. They know what works best and what can lead to problems.

When they recommend priming first, it’s because they’ve found that this approach leads to better results and fewer issues.

Bottom Line

So, to wrap it up, priming before you add texture is usually the way to go if you want the best results when finishing your walls.

It helps the texture stick better, seals the drywall, makes sure everything absorbs evenly, helps you spot and fix imperfections, and generally makes the texture look better.

However, it might take a little more time and effort upfront.

But the benefits of how your wall looks and how long it lasts make it a worthwhile step!